De Sony PDW-U1 / PDW-U2 Utility bestaat uit een driver voor de U1 / U2 en een klein programma waarmee de U1 / U2 beheerd en ingesteld kan worden. De software is beschikbaar voor zowel Mac als PC. Tips.
Sony PDW-U1 (PDWU1) XDCAM external USB drive for reading and writing of all supported XDCAM file-formats. The PDW-U1 is a compact, mobile and highly cost-effective drive, usable in the field or at the desktop. Final Cut Pro X 10.2 supports Sony XAVC, XAVC S, XDCAM, XDCAM HD, and XDCAM EX media. Before importing Sony XAVC and XDCAM media, verify that Pro Video Formats is installed on your system. Check for software updates and, if necessary, install the latest Pro Video Formats.
Download in principe altijd de meest recente versie tenzij je echt een oudere versie nodig hebt. Bekijk ook onze met alle Sony software utilities en drivers.
Kijk ook op de voor meer downloads. Release notes Voor zover bekend worden onderstaand de releasenotes van de verschillende versies weergegeven: v.
Triple-layer rewritable disc is supported. Windows 8 is supported.
Firmware for PDW-U2 has been updated Update of XDCAM Drive Software 12/February/2013 XDCAM Drive Software Ver4.0.1 is released. System Requirements The supplied set of software has been tested and found to run under the following conditions. Update of XDCAM Drive Software 28/December/2012 XDCAM Drive Software Ver4.0.0 for Windows is released. System Requirements The supplied set of software has been tested and found to run under the following conditions. Update of XDCAM Drive Software 27/September/2012 XDCAM Drive Software Ver3.4.0 is released. System Requirements The supplied set of software has been tested and found to run under the following conditions.
System Requirements The supplied set of software has been tested and found to run under the following conditions. General Notice: The Sony XDCAM Drive Software for MAC OS X only supports Intel based Macs. Provides support for: 32-bit Windows XP Professional SP3 32-bit/64-bit Vista Business, Professional, and Ultimate Editions 32/64-bit Windows 7 Professional and Ultimate Editions SP1 32/64-bit SnowLeopard (Mac OS X 10.6).
XDCAM Drive Software (VFAM) for both Windows (version 3.0 and 3.1) and Mac (version 3.0) have been replaced with this version 3.1.1 update to fix a bug in the original version 3.0 driver. This update fixes an interoperability issue when discs are formatted using a PDW-U1 or PDW-U2 running VFAM version 3.0. If you are running the VFAM driver version 3.1 for Windows which was initially released in December 2011, please update it to version 3.1.1 to remain in sync with the changes incorporated in the Mac VFAM version 3.1.1 driver. XDCAM Drive Software (VFAM) Version 3.1.1 must be used with the new USB 3.1.1 PDW-U2 XDCAM Drive. PDW-U1 users are strongly advised to upgrade to XDCAM Drive Software Version 3.1.1 also in order to safely use discs created by the PDW-U2. XDCAM camcorder and deck users should make sure that they are running the most current versions of deck and camcorder firmware available on this web page to maintain compatibility with discs created by drives running VFAM 3.1.1. 1) Support for PDW-U2.
This software package supports both the PDW-U1 and PDW-U2 for both USB 2.0 (Windows and Mac) and USB 3.0 (Windows). 2) PDW-U2 support for the new 128GB Quad Layer disc. This software package supports under Windows read/write to the Quad Layer disc. The new 128GB disc is supported by the PDW-U2 and not by the PDW-U1.
3) Under Windows the XDCAM Drive Utility will start automatically on Windows boot-up. REMARK: At the current time, Avid Media Composer (Windows) displays an 'out of memory' error when certain assets (i.e.JPG files) are dragged into a project bin if the XDCAM Drive Utility is running. Exiting from the XDCAM Drive Utility will prevent this from happening. V.2.45 / 2.3.0.
Sony Xdcam Camcorder
NEW FEATURES & IMPROVEMENTS: 1.) This version has been improved to add greater stability when writing to the Professional Disc using an unstable USB connection. 2.) The operating systems which are supported has been expanded to include the following: Apple - Mac OS X 10.5.8 or later - Mac OS X 10.6.2 (32-bit version) or later. Windows - Windows XP Professional, Service Pack 3 or later - Windows Vista Business 32-bit and 64-bit versions, Service Pack 2 or later - Windows Vista Ultimate 32-bit and 64-bit versions, Service Pack 2 or later - Windows 7 Professional 32-bit and 64-bit versions - Windows 7 Ultimate 32-bit and 64-bit versions v.2.42 / 2.2.1.
Posted by admin Comments are off for this article “Every time I import XDCAM-Files from my PDW-F800 (1080i, XDCAM 422 High, 8 Mono Channels, 48 KHz, 24 Bits) the last 3 seconds in every clip have a looped audio. The duration of the loop is abourt 10 frames. The files are not corrupted with this loop, because if I play the same files in VLC Player, the audio at the end is correct. Must be a problem within the import.” “I am trying to import the native.mxf file of the XDCAM HD 422 into CS6, but getting an error that says missing codec.
What’s the fix? Thanks” Adobe announces Premiere Pro especially the CS6 software provides native support for Sony XDCAM, XDCAM EX, and XDCAM HD (including XDCAM HD 50) cameras and content with no transcoding required, smooth importing, strong metadata support, real-time editing, and flexible delivery options.
Whereas, something frustrating to the Adobe users is that when importing the XDCAM HD422 MXF files to Premier Pro, some error messages like missing codec, looped audio, etc occurred from time to time. Sony XDCAM HD422 series like PDW-F800, PWM-500, PDW-700, PMW-100, PMW-200 are all popular among the videographers. Well, why there are so many importing and editing issues that still exit along with the XDCAM HD422 videos? The basic reason is that Sony XDCAM in MXF or IMX format is not the Adobe Premier Pro natively supported format, so it will be hard to handle Sonyh XDCAM media in Premier Pro. To edit Sony XDCAM media in Premiere Pro smoothly, the easy workaround is to transcode Sony XDCAM MXF, IMX files to MPEG-2 or WMV format which is friendly with Adobe Premiere Pro CS4/CS5/CS6/CC. The step-by-step guide below will shows you an easy way to transfer Sony XDCAM media files to Premiere for smoothly playback and editing. First of all, free download UFUSoft This Mac Sony XDCAM MXF converter can easily convert Sony XDCAM, XDCAM HD and XDCAM EX MXF files without quality loss.
It can generates best editing format/codec for filmmakers and video enthusiasts to use in different NLE apps, such as Adobe Premiere Pro CS4/CS5/CS6, Adobe After Effects, iMovie, Final Cut Express, Final Cut Pro 6/7/X, and more. If you are on Window PC, please get the MXF Converter. Just download it and follow the workflow using Adobe Premiere Pro with Sony XDCAM content. How to transcode Sony XDCAM MXF/IMXF files to MPEG-2 for Premiere Pro on Mac? Add Source Videos Launch the professional Sony MXF Converter Mac, and then click “Add video” button to browse and load your source files.
If you need to import an entire file folder directly, simply click “Add from folder” tab. Choose Output format Go to “Format” menu and choose Adobe Premiere/Sony Vegas – MPEG-2(.mpg) as target format. Tip: If you want to set some parameters for the output profile, you could click the “Settings” button to set the output bitrate, encode, frame rate, resolution, sample rate, channels, etc. Start Sony XDCAM MXF/IMX to Adobe Premiere Pro conversion When the former steps finished, you can press “Convert” button to start rewrapping Sony XDCAM files to MPEG-2 for Adobe Premier Pro CS4/CS5/CS6 on Mac OS X. Once the conversion process is done, click “Open” button to get the generated MPG files. For MXF Converter for Mac 1. I love this MXF converting software.
It helps me solve the big issue of transcoding recording MXF files to FCP. And I'm satisfied with the output video quality. This UFUSoft MXF Converter for Mac can successfully convert the MXF file recorded by my Panasonic P2 to iMovie MOV video.
Sony Xdcam Sxs Driver Mac
Then I can edit it easily. Mavis For MXF Converter 1. So wonderful software, I like it very much. It can help me transcode the MXF recording to the Adobe Premiere for editing. With your MXF Converter tool, I don't worry about importing my P2 MXF file to my Sony Vegas any more.
Sony Xdcam Drivers
And also I can edit my file with your tool.